Product Specification:
*2 standard DMX512 data output ports are provided, supporting 2x170 LED pixels; *ArtNet can be managed in broadcast or unicast mode; *1 ArtNet data can be input, 2 DMX512 data can be output; (total can output 1024 channels) *All network configuration parameters can be directly modified through the built-in buttons and display (no need to connect to a computer for setting) * Other software, consoles, and Art-Net-supported controllers can be used to distribute Art- through the network Net data.
Commonly used to expand the Tiger Touch or MA2 console, and the DMX output port of Madrix software
*Installation method: It can be installed with a light hook or any safe location. *Support two power supply methods: (mains and network cable power supply POE)
1.It is the most cost-effective artnet and dmx adapter with very comprehensive functions.
2.With the led display and 4 function buttons,you need not to find some applications or a web configuration to set it up.
3.there is a M10 screw holes on the top of the node box,you can easily install it on the truss with a stage light clamp hook
4.Built tough and compact the adapter can be powered by PoE (power over ethernet),get a PoE switch，You can use the existing network cable instead of the power cable to power the device, which is very convenient
5.2x DMX512 Out (3pin) with Art-Net, control up to 1024 channels.
- Choosing a selection results in a full page refresh.
